802.11n WallPlate Access Point
The AP 6511 is expressly designed for one of the most challenging wireless LAN environments – hotel guest rooms. Standard service personnel can install the AP 6511 in minutes, not hours, using existing category 5 or 6 cabling already in the walls. The installation is predictable and repeatable – two key reasons the AP 6511 will dramatically lower the installation time and cost of a guest room wireless LAN. The AP’s sleek ‘hide in sight’ design and minute size match the décor of any room. The AP 6511 includes intelligent self-optimizing Controller AP code, which allows a small property to gain the benefits of a central controller – automatic adoption, central configuration and status, and automatic RF management – without the cost of a dedicated RF switch. For larger properties and facilities, the AP 6511 can be managed by Motorola’s Wi-NG-based RF switches for very high scalability and seamless integration with other indoor and outdoor 802.11n access points.
Full 802.11n performance with standard 802.3af
Simplifies and reduces total cost of installation using standard Power-over-Ethernet (PoE).
Dual band Support
Operates in either 2.4 Ghz and 5.0 Ghz frequency bands to support 802.11b/g/n or 802.11a/n wireless LANs.
Internal antennas with 2×2 MIMO radio
Dual 3.5dBi gain antennas and 2×2 MIMO technology extend the performance and range for legacy and new 802.11n clients
Supports fast, secure roaming and rate scaling. Pre-emptive roaming and load balancing are supported when connected to an RF Switch to increase reliability and network resilience.
This unique multi-purpose device can execute and enforce the IDS/IPS security policies configured in the Motorola wireless switch, and can also be utilized as a 24×7 dedicated sensor with Wireless IPS from Motorola AirDefense solutions.
Supports WMM-UAPSD and SIP Call Admission Control, for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11 a/b/g/n clients.
Sleek form factor
Designed to ‘hide in sight’ over any standard Cat5/6 structured wiring plate. The LEDs can be disabled by administrator command to further blend and disappear on the wall. There are no WiFi or WLAN markings so the unit is discreet and subtle.
Modular Industrial Design
The mounting bracket features six unique hole patterns to match most any telecom plate worldwide. A keystone snap-in port provides a fast method to connect any secondary cabling behind the wall to the AP. If the snap-in port is not used for a secondary cable, it can be dedicated as a switched Fast Ethernet port. To further add modularity and flexibility in network design, a three port Fast Ethernet Module can be field installed via a snap-in access port.
Voice, Locationing, Hot Spot Access
The AP 6511 supports voice over wireless LAN (VoWLAN) services, such as QoS, which ensures toll-quality even with many simultaneous VoWLAN calls on a single access point. Locationing services over 802.11 provide the ability to locate and track people or assets, and even to control access to the network or applications. In addition, the wireless hotspot provides a walled garden and forced portal page.
|Available mount configurations||Mount over any structured wiring telecom box, or on a flat surface.|
|Dimensions (HxWxD)||5″ x 2.95” x 1” (12.8cm x 7.5cm x 25.4cm). 12oz (0.34Kg)|
|LEDs||Two single color status LEDs; power, error, packets, operating frequency|
|Physical interfaces||10/100Mb auto-sensing via 8-pin header
|Weight||1 lbs / 0.5 kg|
|Integrated power over ethernet support||Standards-based IEEE 802.3af|
|Operating current||0.170w (typical)|
|Operating voltage||802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range)|
RADIO SPECIFICATIONS AND NETWORKING
|Maximum transmit power settings||20dBm|
|Data rates supported||802.11b/g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps 802.11a: 6,9,12,18,24,36,48, and 54Mbps 802.11n: MCS 0-15 up to 300Mbps|
|Network standards||802.11a, 802.11b, 802.11g, 802.11n|
|Operating bands – EU||FCC EU 2.412 to 2.462 GHz 2.412 to 2.472 GHz 5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 5.725 to 5.825 (UNII -3) 5.150 to 5.350 GHz 5.725 to 5.850 (ISM) 5.470 to 5.725 GHz (Country Specific) Japan 2.412 to 2.484GHz 4.900 to 5.000 GHz 5.150 to 5.250 GHz|
|Operating channels||5GHz: All channels from 4920 MHz to 5825 MHz 2.4GHz: Chan 1-13 (2412-2472 MHz), Actual operating frequencies depend on national regulatory limits|
|Wireless medium||Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO)|
|Layer 2 and Layer 3||802.11-802.3 bridging, 802.1q VLAN tagging and trunking, Dyn DNS, DHCP server/client|
|Security||Stateful Firewall, NAT, 802.1x, 802.11i, WPA2-CCMP (AES), WPA2-TKIP, WPA-TKIP, Rogue Detection, Secure guest access (HotSpot)|
|Management||Independent management via SSH, Telnet. Adopted management by Controller AP available at first release. Adoption by RF switch available in future software release.|
|QoS||802.11e, 802.1p, DiffServ, TOS|
|EMC||FCC Part 15 Class B|
|Electrical safety||EN 60950-1|
|Environmental||EU RoHS Directive 2002/95/EEC|
|Human exposure EMF||EN 50385, FCC Part 2, OET Bulletin 65, RSS-102 Issue 2|
|Electrostatic discharge||+/- 15 kV (Air), +/- 8 kV (contact)|
|Operating altitude||8,000 ft./2438 m|
|Operating humidity||5 to 95% RH (non condensing)|
|Operating temperature||-4°F to 122° F/0°C to 50° C|
|Storage altitude||15,000 ft./4572 m|
|Storage temperature||-40°F to 158° F/-40°C to 70° C|
Partner: Zebra Technologies – Enterprise